IAPMO RESEARCH AND TESTING, INC.

5001 E. Philadelphia Street, Ontario, CA 91761-2816 • (909) 472-4100 • Fax (909) 472-4244 • www.iapmo.org

CERTIFICATE OF LISTING

IAPMO Research and Testing, Inc. is a product certification body which tests and inspects samples taken from the supplier's stock or from the market or a combination of both to verify compliance to the requirements of applicable codes and standards. This activity is coupled with periodic surveillance of the supplier's factory and warehouses as well as the assessment of the supplier's Quality Assurance System. This listing is subject to the conditions set forth in the characteristics below and is not to be construed as any recommendation, assurance or guarantee by IAPMO Research and Testing, Inc. of the product acceptance by Authorities Having Jurisdiction.

Effective Date :	March 2010	Void After: March 2011
Product:	Acid Waste Systems	File No. 0500
Issued To :	SCHOTT NORTH AMERICA, INC. CORPORATE OFFICE 555 TAXTER ROAD - 4TH FLOOR ELMSFORD, NY  10523
IDENTIFICATION:	Manufacturer's name or trademark. The product or the product container shall also bear the UPCฎ certification mark.
CHARACTERISTICS:	A line of pipe and fittings made of borosilicate glass for use in corrosive waste systems.  Joints are made with stainless steel bands and TFE plastic gaskets. The couplings are manufactured for either beaded end to beaded end or plain end to beaded end pipe.  Unless otherwise noted, all pipe and fittings are beaded on both ends.  The systems may be buried when installed in accordance with the manufacturer's recommendations and the requirements of the latest edition of the Uniform Plumbing Code. Products comply with the applicable sections of the latest edition of the Uniform Plumbing Codeฎ.  Manufactured in compliance with ASTM C 1053-2000 (R2005). Products listed on this certificate have been tested by an IAPMO R&T recognized laboratory. This recognition has been granted based upon the laboratory’s compliance to the applicable requirements of ISO/IEC 17025.
MODELS: KIMAX Brand - Sizes 1-1/2", 2", 3", 4" & 6" Part No.   Description 6500       Pipe (5' lengths)- Sizes 1-1/2", 2", 3", 4" & 6" 6500S      Pipe – Sizes 1-1/2” x 8-3/4”, 1-1/2” x 11-1/2”, 1-1/2” x 10” 6501       Pipe (10' lengths)-Sizes 1-1/2", 2", 3", 4" & 6" 6502       EPS (Expanded Polystyrene) Covered Pipe for Underground                Use (5' lengths)-Sizes 1-1/2", 2", 3",4" & 6" 6504       Pipe (Available in 1' increments up to 10' long)            Sizes 1-1/2", 2", 3", 4" & 6" Beaded one end only 6511       Sweeps (1/4, 1/6, 1/8, & 1/16 bend)- Sizes 1-1/2", 2",            3", 4" & 6" 6511       Sweep Offsets (1/4, 1/6, 1/8 & 1/16 bend) - Sizes            1-1/2", 2", 3", 4" & 6" 6512       Long 90ฐ Bend- Sizes 1-1/2" & 2" 6512P      Long 90ฐ Bend (Annealed) Plain End -Size 1-1/2" & 2" 6513       Bends (1/4, 1/6, 1/8 & 1/16 bend) - Sizes 1-1/2",            2", 3", 4" & 6" (6" size in 1/8 bend only) 6513       Bend Offsets (1/4, 1/6, 1/8 & 1/16 bend) - Sizes            1-1/2", 2", 3" & 4" 6514       Short 90ฐ Bend - Size 1-1/2" 6518       Quarter Bend Reducer - Sizes 2" x 1-1/2" , 3" x 1-1/2",               3" x 2", 4" x 1-1/2", 4" x 2", 4" x 3", 6" x 1-1/2",                  6" x 2", 6" x 3" & 6" x 4" 6519       Double Quarter Bend - Sizes 1-1/2", 2" x 2" x 1-1/2", 2",            3", 4" & 6" 6519P      Double Quarter Bend (Plain End Outlet) - Sizes            1-1/2", 2" x 2" x 1-1/2", 2", 3", 4" & 6" 6520       Adjustable Sanitary Tee (One Adjustable Inlet)            Size 1-1/2" x 1-1/2" x 2" 6521       Single Sanitary Tee - Sizes 1-1/2", 2" x 1-1/2",            2", 3" x 1-1/2", 3" x 2", 3", 4" x 1-1/2", 4" x 2",            4" x 3", 4", 6" x 2", 6" x 3", 6" x 4" & 6" 6522       Double Sanitary Tee - Sizes 1-1/2", 2" x 1-1/2",            2", 3" x 1-1/2", 3" x 2", 3", 4" x 1-1/2", 4" x 2",            4" x 3", 4", 6" x 2", 6" x 3", 6" x 4" & 6" 6523       Straight T-Sizes 1-1/2” x 1-1/2”, 2” x 1-1/2”, 2” x 2”,            3” x 1-1/2”, 3” x 2”, 3” x 3”, 4” x 1/2”, 4” x 1-1/2”,            4” x 2”, 4” x 3”, 4” x 4”, 6” x 1/2”, 6” x 3”, 6” x 4”            6” x 6” 6524       Test Tee (with cleanout) - Sizes 1-1/2", 2", 3" & 4" 6526       Drain line Wye - Sizes 1-1/2", 2" x 1-1/2", 2", 3 x 1-1/2",                  3" x 2", 3", 4" x 1-1/2", 4" x 2", 4" x 3",4", 6" x 2",            6" x 3", 6" x 4" & 6" 6526 T 3030 Drainline Y single Temp – 3” x 3” 6526 6015  Drainline Y Single 6” x 1-1/2” 6527       Drain line Wye (Double) - Sizes 1-1/2", 2" x 1-1/2",            2", 3" x 1-1/2", 3" x 2", 3", 4" x 1-1/2", 4" x 2",            4" x 3", 4", 6" x 2", 6" x 3", 6" x 4" & 6" 6528       Combination Wye and 1/8 Bend - Sizes 1-1/2", 2" x 1-1/2",            2", 3" x 1-1/2", 3" x 2", 3", 4" x 1-1/2", 4" x 2",            4" x 3", 4", 6" x 2", 6" x 3", 6" x 4" & 6" 6529       Combination Wye and 1/8 Bend (Double) - Sizes            1-1/2", 2" x 1-1/2", 2", 3" x 1-1/2", 3" x 2", 3",            4" x 1-1/2", 4" x 2", 4" x 3", 4", 6" x 2", 6" x 3", 6" x 4" & 6" 6530       Adjustable Sanitary Tee (Plain End Outlet) - Size 1-1/2" 6531       Partition (Compact) - Sizes 2" x 1-1/2", 2",            2" x 1-1/2" x 1-1/2" x 1-1/2" 6532       Single Upright Wye or H - Sizes 1-1/2", 2" x 1-1/2",            2", 3" x 1-1/2", 3" x 2", 3", 4" x 1-1/2", 4" x 2",            4" x 3", 4", 6" x 3", 6" x 4" & 6" 6536       Straight Reducers or Increasers - 2" x 1-1/2", 3"x 1-1/2",            3" x 2", 4" x 1-1/2", 4" x 2", 4" x 3",6" x 1-1/2",            6" x 2", 6" x 3" & 6" x 4" 6537       Eccentric Reducers or Increasers - Sizes 2" x 1-1/2",                  3" x 1-1/2", 3" x 2", 4" x 1-1/2", 4" x 2", 4" x 3",                  6" x 1-1/2", 6" x 1-1/2", 6" x 2", 6" x 3", 6" x 4" 6540       Vent Increasers - Sizes 1-1/2" x 3", 2" x 3" & 3" x 4" 6540 z 3600 Pipe Vent Increasers 6541       Single Sanitary Tee - Sizes 1-1/2", 2" x 1-1/2",            2", 3" x 2", 3", 4" x 1-1/2", 4" x 2", 4" x 3", 4",            6" x 2", 6" x 3", 6" x 4" & 6" 6546       Single Drain line Wye - Sizes 1-1/2", 2", 3" x 2", 3",                4" x 1-1/2", 4" x 2", 4" x 3", 4", 6" x 2", 6" x 3",                  6" x 4" & 6" 6548       Combination Wye and 1/8 Bend - Sizes 2" x 1-1/2",2",            3" x 2", 3", 4" x 1-1/2", 4" x 2", 4" x 3", 4", 6" x 2",               6" x 3", 6" x 4" & 6" 6549       Double Combination Wye and 1/8 Bend - Sizes 2" x 1-1/2",            2", 4" x 3", 4", 6" x 2", 6" x 3", 6" x 4" & 6" 6544       Cleanout Plug - Sizes 1-1/2", 2", 3", 4" & 6" 6550       U Bend (vent loop) - Sizes 1-1/2", 2", 3" & 4" 6550B      U Bend (Vent Loop) w/ Cleanout (for vent only) 6566       "MJ" Pipe Adapter - Sizes 1-1/2", 2", 3" & 4" 6616       Beaded Outlet 3" Hemispherical Cup Sink 6617       Beaded Outlet 6" Hemispherical Cup Sink 6617P      Plain End Outlet 6" Hemispherical Cup Sink 6618       Beaded Outlet 3" x 9" Oval Cup Sink 6618P      Plain End Outlet 3" x 9" Oval Cup Sink 6619       Beaded Outlet 3" x 6" Oval Cup Sink 6619P      Plain End Outlet 3" x 6" Oval Cup Sink 6627       3" x 6" Oval Horizontal, Wall Mounted Cup Sink - 1-1/2"                Plain End Outlet 6628       3" x 6" Oval Vertical, 1-1/2" Outlet Wall Mounted Cup Sink 6650       Drain line Coupling (Bead to Bead) - Sizes 1-1/2",2", 3", 4" & 6" 6655       Adapter Coupling - Sizes 2" x 1-1/2", 2" x 1-3/4"            & 2" x 1-7/8" 6661       B/P Drain line Coupling (Bead to Plain End) -            Sizes 1-1/2", 2", 3", 4" & 6" 6665       Adapter Coupling - Sizes 1-1/2" x 1-1/4" & 1-1/2" 6667 4000  Drainline Coupling for 6708 TRAP 4” R01 6680       Thread Adapters (Threaded to Beaded Pipe) - Sizes            1-1/2", 2", 3" & 4" 6685       Adjustable Thread Adapter - Size 2" x 1-1/2" 6700       Swivel P Trap - Sizes 1-1/2", 2" x 1-1/2" & 2" 6700 S 3   Swivel P Trap 1/2” TAP – 1 1/2” x 1 1/2” 6701       Swivel P Trap - Sizes 1-1/2", 2" x 1-1/2" & 2" 6704       Swivel P Trap (Plain End Outlet) - Sizes 1-1/2", 2" x 1-1/2" & 2" 6705       Swivel P Trap - Sizes 2" x 1-1/2", 2" x 2" 6707       P Style Drum Trap - Sizes 1-1/2", 2" x 1-1/2" & 2" 6708       Interceptor Trap - Size 1-1/2" 6710       P Style Swivel Drum Trap - Sizes 1-1/2", 2" x 1-1/2" & 2" 6715       Inlet Swivel Drum S Trap - Sizes 1-1/2", 2" 6716       Outlet Swivel Drum Trap - Sizes 1-1/2", 2" 6718       P Trap-Sizes 1-1/2", 2" x 1-1/2", 2", 3", 4" & 6" 6718 S 11  P Trap w/ Tap – 3” x 3” *6720      Sink Outlet Assembly - Sizes 1-1/2" & 2" *6720D     Sink Outlet Assembly - Size 2" 6726       Sink Stopper - Sizes 1-1/2" & 2" 6727       Sink Overflow - Beehive Type - Size 1-1/2" 6728       Tailpiece Assembly - Sizes 1-1/2" x 6-1/2" & 1-1/2" x 10-1/2" 6730       Tailpiece – Sizes 1-1/2” x 6-1/2”, 1-1/2” x 10-1/4” 6735       Split Coupling (Threaded to Beaded Pipe) - Size 1-1/2" *6738      Gasket - Size 1-1/2" *6739      Gasket - Size 1-1/2" 6770       Running Trap - Sizes 1-1/2", 2", 3", 4" & 6" *7290      Pipe Hangers (padded) - Sizes 1-1/2", 2", 3", 4" & 6" *7310- 56802      KIMAX Portable Glass Pipe Cutter for 1-1/2", 2", 3", 4" & 6". 7310- 2000       KIMAX Portable Glass Pipe Cutter for 1-1/2" or 2" diameters only. *These products are marked on the container only.
ADDITIONAL COMPANIES:
ADDITIONAL COMPANY INFO: