IAPMO RESEARCH AND TESTING, INC.

5001 E. Philadelphia Street, Ontario, CA 91761-2816 • (909) 472-4100 • Fax (909) 472-4244 • www.iapmo.org

CERTIFICATE OF LISTING

IAPMO Research and Testing, Inc. is a product certification body which tests and inspects samples taken from the supplier's stock or from the market or a combination of both to verify compliance to the requirements of applicable codes and standards. This activity is coupled with periodic surveillance of the supplier's factory and warehouses as well as the assessment of the supplier's Quality Assurance System. This listing is subject to the conditions set forth in the characteristics below and is not to be construed as any recommendation, assurance or guarantee by IAPMO Research and Testing, Inc. of the product acceptance by Authorities Having Jurisdiction.

Effective Date :	May 2010	Void After: May 2011
Product:	Septic Tanks (Prefabricated)	File No. 1311
Issued To :	LOOMIS TANK & TROUGH P.O. BOX 910 ARROYO GRANDE, CA  93421
IDENTIFICATION:	Each tank shall be clearly and permanently marked with the manufacturer’s name and/or registered trademark, model number, the month and year of manufacture, inlet & outlet, the maximum recommended depth of earth cover in feet and the nominal working volume. Markings shall appear on a plate that has been molded, cast or wet set onto the tank, located either on the left hand side of the inlet or on top of the tank near the inlet.  Permanent markings shall be adequately protected from corrosion so as to remain legible over the life of the tank.  The product shall also bear the UPC® certification mark adjacent to product markings.
CHARACTERISTICS:	Prefabricated septic tanks made from concrete, glass-fiber reinforced polyester, polyethylene, synthetic structural fiber reinforced concrete and steel fiber reinforced concrete.  To be installed in accordance with the manufacturer's instructions and the latest edition of the Uniform Plumbing Code. Products comply with the applicable sections of the latest edition of the Uniform Plumbing Code®.  Manufactured in compliance with IAPMO/ANSI Z 1000-2007. Products listed on this certificate have been tested by an IAPMO R&T recognized laboratory. This recognition has been granted based upon the laboratory’s compliance to the applicable requirements of ISO/IEC 17025.
MODELS:   Fiberglass Reinforced   LST 7.5, 10, 12 & 15
ADDITIONAL COMPANY INFO: