IAPMO RESEARCH AND TESTING, INC.

5001 E. Philadelphia Street, Ontario, CA 91761-2816 • (909) 472-4100 • Fax (909) 472-4244 • www.iapmort.org





CERTIFICATE OF LISTING

IAPMO Research and Testing, Inc. is a product certification body which tests and inspects samples taken from the supplier's stock or from the market or a combination of both to verify compliance to the requirements of applicable codes and standards. This activity is coupled with periodic surveillance of the supplier's factory and warehouses as well as the assessment of the supplier's Quality Assurance System. This listing is subject to the conditions set forth in the characteristics below and is not to be construed as any recommendation, assurance or guarantee by IAPMO Research and Testing, Inc. of the product acceptance by Authorities Having Jurisdiction.


 

Effective Date:
January 2014        
Void After: January 2015
     
Product: Showers (Plastic) 
File No. 3210
     
Issued To: MANSFIELD PLUMBING PRODUCTS
1505 INDUSTRIAL DRIVE
HENDERSON, TX  75652
     
Identification:
Manufacturer's name and/or trademark or both shall be permanently and legibly marked on the unit so as to be visible after installation.

Field installed kits shall be marked on the package or the product with the manufacturer's name or trademark, kit model number, or model numbers of the fixture(s). The product shall also bear the UPC® certification mark.
     
Characteristics:
Plastic shower units with or without walls manufactured integral with the shower; or as a multi-piece unit distributed as part of the shower unit.

Showers intended for installation against a wall shall incorporate an integral, factory applied nailing flange in accordance with the latest edition of CSA B45.5/IAPMO Z124. Showers w/o nailing flanges are listed as drop-in units only and are not to be installed against a wall. To be installed in accordance with the manufacturer's instruction and the latest edition of the Uniform Plumbing Code.

Products listed on this certificate have been tested by an IAPMO R&T recognized laboratory. This recognition has been granted based upon the laboratory's compliance to the applicable requirements of ISO/IEC 17025.
     
Products are in compliance with the following code(s):
 
Uniform Plumbing Code (UPC®)
International Plumbing Code (IPC®)
 
Products are in compliance with the following standard(s):
 
CSA B45.5-11/IAPMO Z124-2011

 

 

models_0003210

MODELS:

 

Shower Receptors (Acrylic)

 

36" x 36"     Neo Angle

38" x 38"     Neo Angle

42" x 42"     Neo Angle

36" x 36"     Double Threshold

36" x 36"     Single Threshold

36" x 42"     Single Threshold

42" x 36"     Single Threshold

48" x 32"     Single Threshold

48" x 34"     Single Threshold

60" x 34"     Single Threshold