IAPMO RESEARCH AND TESTING, INC.
5001 E. Philadelphia Street, Ontario, CA 91761-2816 • (909) 472-4100 • Fax (909) 472-4244 • www.iapmo.org


IAPMO Research and Testing, Inc. is a product certification body which tests and inspects samples taken from the supplier's stock or from the market or a combination of both to verify compliance to the requirements of applicable codes and standards. This activity is coupled with periodic surveillance of the supplier's factory and warehouses as well as the assessment of the supplier's Quality Assurance System. This listing is subject to the conditions set forth in the characteristics below and is not to be construed as any recommendation, assurance or guarantee by IAPMO Research and Testing, Inc. of the product acceptance by Authorities Having Jurisdiction.
| Effective Date : | April 2010 | Void
After:
April 2011 |
| Product: | Water Closets with Dual Flush Feature | File
No. 4261 |
| Issued To : | CAROMA INDUSTRIES LTD 26-32 WALTER STREET WETHERILL PARK NSW, 2164 AUSTRALIA |
|
| IDENTIFICATION: | The identification of the flush mode shall be depicted on the actuator. This identification shall be either by graphic display or lettering, or shall be intuitively apparent. The watercloset shall be legibly marked as specified in ASME A112.19.2 -2008/CSA B 45.1-2008 or ANSI Z124.4, as appropriate. Water closets equipped with dual flush device shall be marked with the reduced flush volume and the designation ASME A112.19.14 to signify compliance with this standard. The location of the mark shall be determined by the manufacturer and is not required to be permanent, but it shall be visible after installation. The label shall be intended for removal by the occupant only, and this shall be so stated on the label. The product shall also bear the cUPC® certification mark. | |
| CHARACTERISTICS: | Six-liter water closets equipped with a dual flushing device. To be installed in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code. Products comply with the applicable sections of the latest edition of the Uniform Plumbing Code®. Products are also certified as “Green” in accordance with IAPMO R07S. Such product, by their very nature, provides a level of sustainability in the built environment that is not normally included in typical applications. Models listed to the National Plumbing Code of Canada and Relevant Canadian Standard(s) shall bear the cUPC mark of conformity. Manufactured in compliance with ASME A112.19.14-2006 & ASME A112.19.2-2008/CSA B45.1-2008. Products listed on this certificate have been tested by an IAPMO R&T recognized laboratory. This recognition has been granted based upon the laboratory’s compliance to the applicable requirements of ISO/IEC 17025. |
|
MODELS: Note: Models listed in compliance with CSA B45 shall be preceded by a "c" to show compliance. W A T E R C L O S E T S Model Name Model No. GPF cAdelaide 270 CC Cube (Adelaide 270 Bowl-834000 w/Cube Tank-814790) 1.6/0.8 cAdelaide 270 CC Standard (Adelaide 270 Bowl-834000 w/Standard Tank-814328) 1.6/0.8 Adelaide 270 EH CC cube (Bowl#825500/Tank#814790) 1.6/0.8 Adelaide 270 EH CC Standard (Bowl#825500/Tank#814328 1.6/0.8 cBondi 270 CC Standard (Bowl#609159/Tank#726350) 1.6/0.8 cBondi 270 CC Elongated EH (Bowl#609120/Tank#726350) 1.6/0.8 cBondi 270 Easy Height (Bowl#609177/Tank#726350) 1.6/0.8 cBondi 270 Elongated (Bowl#609100/Tank#726350) 1.6/0.8 cBondi 305 CC Standard (Bowl#609151/Tank#726350) 1.6/0.8 cBondi 305 Elongated (Bowl#609130/Tank#726350) 1.6/0.8 Brisbane 270 CC Standard (Bowl#833900W/Tank#810266W) 1.6/0.8 cCaravelle One Piece (989646) 1.6/0.8 cCaravelle One Piece EH (989668) 1.6/0.8 cCaravelle 270 (Bowl#609159/Tank#629435) 1.6/0.8 cCaravelle Elongated 270 (Bowl#609100/Tank#629435) 1.6/0.8 cCaravelle ADA 270 (Bowl#609177/Tank#629435) 1.6/0.8 cCaravelle ADA Elongated 270 (Bowl#609120/Tank#629435) 1.6/0.8 cCaravelle 305 (Bowl#609151/Tank#629435) 1.6/0.8 Caravelle Elongated 305 (Bowl#609130/Tank#629435) 1.6/0.8 cColonial 270 (Bowl#605310/Tank#625070) 1.6/0.8 Colonial 270 EH CC (Bowl#622322/Tank#609151A) 1.6/0.8 cReflection 270 (Bowl#609159/Tank#629530) 1.6/0.8 Syndney Smart Rear Outlet (Bowl #609450/Tank #622322) 1.28/0.8 Sydney Smart 270 (Bowl #609159/Tank #622322) 1.28/0.8 Sydney Smart 270 EH (Bowl #609177/Tank #622322) 1.28/0.8 Sydney Smart 270 Elongated (Bowl #609100/Tank #622322) 1.28/0.8 Sydney Smart 305 Elongated (Bowl #609130/Tank #622322) 1.28/0.8 cReflection 305 (Bowl#609151/Tank#629530) 1.6/0.8 cRoyale 270 (Bowl#609159/Tank#624530) 1.6/0.8 cRoyale 270 ADA Elongated (Bowl#609120/Tank#624530) 1.6/0.8 cRoyale 270 Easy Height (Bowl#609177/Tank#624530) 1.6/0.8 cRoyale 270 Elongated (Bowl#609100/Tank#624530) 1.6/0.8 cRoyale 305 (Bowl#609151/Tank#624530) 1.6/0.8 cRoyale 305 Elongated (Bowl#609130/Tank#624530) 1.6/0.8 cSydney 270 CC ADA Elongated(Caravelle 270 ADA Elongated Bowl-609120 w/Sydney Tank-622320)1.6/0.8 cSydney 305 CC Elongated (Caravelle 305 Elongated Bowl-609130 w/Sydney Tank-622320) 1.6/0.8 cSydney 270 Easy Height (Bowl#609159/Tank#622320) 1.6/0.8 cSydney 270 Elongated (Bowl#609100/Tank#622320) 1.6/0.8 cSydney Low Profile 270 (Bowl#609120/Tank#622330) Easy Height Elongated 1.6/0.8 Sydney Low Profile 270 (Bowl #609100/Tank #622330) Elongated 1.6/0.8 Sydney Low Profile 270 (Bowl #609159/Tank #622330)Round 1.6/0.8 Sydney Low Profile 270EH (Bowl #609177/Tank #622330) Elongated 1.6/0.8 cSydney Low Profile 305 (Bowl#609151A/Tank#622330) 1.6/0.8 Sydney Low Profile 305 (Bowl #609130/Tank #622330) Elongated 1.6/0.8 cSydney 305 CC (Bowl#609151A/Tank#622320) 1.6/0.8 cSydney Smart 305 CC (Bowl#609151A/Tank#622322) 1.28/0.8 Sydney Smart 270 EH (Bowl #609120/Tank #622322) Elongated 1.6/0.8 cTasman Suite (Bowl#609169/Tank#800032) 1.6/0.8 Walvit (Bowl#604118/Tank#227006) 1.6/0.8 cWalvit Wall-Hung Water Closet w/D715 (Bowl#604118/Bracket#687715) 1.6/0.8 cWalvit Elongated Wall Hung Water Closet w/D715 Sanifix Bracket and Water Wafer MK#Tank (604119W/687715/227006) 1.6/0.8 |
||
| ADDITIONAL COMPANIES: | ||
| ADDITIONAL COMPANY INFO: | ||



|
|