IAPMO RESEARCH AND TESTING, INC.
5001 E. Philadelphia Street, Ontario, CA 91761-2816 • (909) 472-4100 • Fax (909) 472-4244 • www.iapmort.org
IAPMO Research and Testing, Inc. is a product certification body which tests and inspects samples taken from the supplier's stock or from the market or a combination of both to verify compliance to the requirements of applicable codes and standards. This activity is coupled with periodic surveillance of the supplier's factory and warehouses as well as the assessment of the supplier's Quality Assurance System. This listing is subject to the conditions set forth in the characteristics below and is not to be construed as any recommendation, assurance or guarantee by IAPMO Research and Testing, Inc. of the product acceptance by Authorities Having Jurisdiction.
| Effective Date: | August 2012 -Rev. 12/4/2012- | Void After:
August 2013
|
| Product: | Plumbing Fixtures (Stainless Steel) | File No. 5045 |
| Issued To: | KAIPING DAWN PLUMBING PRODUCTS INC. NO. 2 DONGIE INDUSTRIAL ZONE KAIPING CITY, GUANGDONG, 529321 CHINA |
|
| Identification: | Each stainless steel plumbing fixture shall be marked with the manufacturer's name or trademark, "N". These marks shall be legible, readily identified, visible after the fixture is installed, and be applied so as to be permanent. The product shall also bear the cUPC® certification mark. |
|
| Characteristics: | Stainless steel plumbing fixture to be installed in accordance with the manufacturer's installation instructions and the requirements of the latest edition of the Uniform Plumbing Code. Fixtures may include kitchen sinks, bar sinks, and or lavatories.
Products listed on this certificate have been tested by an IAPMO R&T recognized laboratory. This recognition has been granted based upon the laboratory's compliance to the applicable requirements of ISO/IEC 17025.
|
|
|
Products are in compliance with the following code(s):
|
||
|
Uniform Plumbing Code (UPC®)
National Plumbing Code of Canada |
||
|
Products are in compliance with the following standard(s):
|
||
|
ASME A112.19.3-2008/CSA B45.4-2008
|
||
| ||
| ||
|
MODELS: Model No. Description 3237 14" x 15" largest overall dimension,
single bowl, 7" deep 3238 19" x 17" largest overall dimension,
single bowl, 7" deep ASU101 21-1/4" x 20-1/2", single bowl,
8" deep ASU102 18-1/2" x 15-3/4", single bowl,
8-3/4" deep ASU103 20-7/8" x 16-7/8", single bowl,
9-5/8" deep ASU105 22" x 20", single bowl, 10"
deep ASU106 Overall size 772X472X270, type 304 stainless
steel, 18 gauge, satin finish ASU107L Overall size 890X510X250, type 304 stainless
steel, 18 gauge, satin finish ASU107R Overall size 890X510X250, type 304 stainless
steel, 18 gauge, satin finish ASU108L Overall size 890X510X250, type 304 stainless
steel, 18 gauge, satin finish ASU108R Overall size 890X510X250, type 304 stainless
steel, 18 gauge, satin finish ASU109 Overall size 780X470X200, type 304 stainless
steel, 18 gauge, satin finish ASU110L 29-5/6" X 20-5/6", double bowl,
7"/9-7/16" deep ASU110R 29-5/6" X 20-5/6", double bowl,
9-7/16"/7 deep ASU111L 29-5/6" X 20-5/6", double bowl,
6"/9-7/16" deep ASU111R 29-5/6" X 20-5/6", double bowl,
9-7/16"/6" deep ASU112L 30" x 20", double bowl,
6"/10" deep ASU112R 30" x 20", double bowl,
10"/6" deep ASU2316 25"×18-1/8"×10" Single bowl,
under-mounted sink, 18 gauge BS121307 13-5/16"×14-7/8"×6-11/16"
Single bowl, under-mounted sink, 18 gauge BS1215 16-15/16" x 13-25/32", single bowl,
7-3/32" deep BS131507 14-7/8"×17-1/4"×7-7/8" Single
bowl, under-mounted sink, 18 gauge BS161609 17-5/32"×17-5/32"×9-1/16"
Single bowl, under-mounted sink, 18 gauge BSQ121508 14" x 17" x 8" Single bowl, No mounting
hole, Under-mounted sink, 18 gauge BSQ131610 18" X 15" x 10" Single bowl, no mounting
hole, under-mounted sink, 18 gauge DAF3320 33"×20-3/4"×10-1/2" Single
bowl, Apron front, under-mounted sink, 18 gauge DAF3320C 33"×22-3/16"×10-1/2" Single
bowl, Apron front, under-mounted sink, 18 gauge DSC301717 32"×18-1/2"×10-3/8" Double
bowl, under-mounted sink, 16 gauge DSQ241609 26"×18"×9" Single bowl,
under-mounted sink, 18 gauge DSQ271616 29"×18"×10-1/2" Double bowl,
under-mounted sink, 18 gauge DSQ2816 30" x 18" x 10", single bowl, undermount DSQ3116 33" x 18" x 10-1/2", single
bowl, undermout DSQ301515 32" x 19" x 10"/17" x 15 7-16 x 10"/11
13/16 x 15 7/16" x 10" Double bowl, No mounting hole,
under-mounted sink, 18 gauge DSQ311815 33" x 20-1/2" 10-1/2"
(8-1/2"), double bowl, undermount DSU1916 21-1/16" x 18-1/8", single bowl,
10" deep DSU2517 26 1/2" x 18" x 10" Single bowl, no
mounting hole, under-mounted sink, 16 gauge DSU3017 32" x 18-1/2" x 10", single
bowl, undermount DSU3018 Single bowl stainless steel sink, 33" x
18-1/2" x 10" deep DSU301916R 32" x 20-5/8" x 10"
(8-3/4"), double bowl, undermount DSU3118 32-11/16" x 20-1/4", single bowl,
10-9/16" deep DSU4120 Single bowl stainless steel sink, 41-3/8"
x 19-3/4" x 11-3/8" deep ES201809 22" x 20" x 9" Single bowl, under-mounted
sink, 18 gauge ES231609 24-3/8" x 17-9/16" x 9" Single Bowl, under-mounted
sink, 18 gauge ES281609 29-1/2" x 17-9/16" x 9-1/2" Single bowl,
under-mounted sink, 18 gauge ES281616 30-1/2" x 18-1/8" x 7-7/8" (7-7/8") Double
bowl, under-mounted sink, 18 gauge ES301816L 31-9/16" x 20-1/2" x 9-7/16" (8") Double
Bowl, under-mounted sink, 18 gauge ES301816R 31-9/16" x 20-1/2" x 9-7/16 (8") Double bowl,
under-mounted sink, 18 gauge ES311814L 32-3/4" x 20-1/2" x 7-3/4"
(7"), double bowl, undermount ES311814R 32-3/4" x 20-1/2" x 7-3/4" (7") Double
Bowl, under-mounted sink, 18 gauge ES331814L 34-3/4" x 19-5/8" x 10" (7") Double bowl,
under-mounted sink, 18 gauge ES331814R 34-3/4" x 19-5/8" 10" (7") Double Bowl,
under-mounted sink, 18 gauge SRU201609 21-7/8"×17-5/32"×8-21/32"
Single bowl, under-mounted sink, 18 gauge SRU251610 26 1/2" x 18" x 10" Single bowl, no
mounting hole, under-mounting sink, 18 gauge SRU301616L 31-7/8"×17-3/16"×9" (8") Double
bowl, under-mounted sink, 18 gauge SRU301616R 31-7/8"×17-3/16"×9" (8") Double
bowl, under-mounted sink, 18 gauge SRU331616 34-3/16"×17-3/16"×9"(9") Double
bowl, under-mounted sink, 18 gauge SRU311710 33 1/8", x 19 3/16" x 10" single bowl, no
mounting hole, under-mounted sink, 18 gauge TDS4520 Triple bowl stainless steel sink, 45-7/8"
x 20-7/8" x 9" deep (2 bowls), 7-1/2" deep enter bowl |
||
|
ADDITIONAL COMPANY INFO: |
||
|
