IAPMO RESEARCH AND TESTING, INC.

5001 E. Philadelphia Street, Ontario, CA 91761-2816 • (909) 472-4100 • Fax (909) 472-4244 • www.iapmo.org

CERTIFICATE OF LISTING

IAPMO Research and Testing, Inc. is a product certification body which tests and inspects samples taken from the supplier's stock or from the market or a combination of both to verify compliance to the requirements of applicable codes and standards. This activity is coupled with periodic surveillance of the supplier's factory and warehouses as well as the assessment of the supplier's Quality Assurance System. This listing is subject to the conditions set forth in the characteristics below and is not to be construed as any recommendation, assurance or guarantee by IAPMO Research and Testing, Inc. of the product acceptance by Authorities Having Jurisdiction.

Effective Date :	March 2010	Void After: March 2011
Product:	Barrier Materials **NSF 61 Section 5**	File No. N-4917
Issued To :	COHESANT MATERIALS INC. 23400 Commerce Park Road BEACHWOOD, OH  44122
IDENTIFICATION:	Product containers shall be permanently and legibly marked with the manufacturer's name or trademark, and product identification, batch number or date of manufacturing.  The fitting may also be marked with the standard designation within a rectangular box.
CHARACTERISTICS:	Epoxy coatings for pipes or tanks to be applied according to the manufacturer's instructions and the specifications within this certificate of listing. Manufactured in compliance with NSF/ANSI 61-2005 AD 1.0. Products listed on this certificate have been tested by an IAPMO R&T recognized laboratory. This recognition has been granted based upon the laboratory’s compliance to the applicable requirements of ISO/IEC 17025.
MODELS:                                                  Water        Water                             Water Contact        Contact      Contact Trade Designation          Size Restriction      Temp         Material Coatings – Pipe AquataPoxy A-6[1]          1” – 3”, >=6”         CLD 23       EPOXY AquataPoxy A-61[3]          >=30”                CLD 23       EPOXY [1]  Colors:  White, Black, Blue, Gray        Number of Coats:  1-2        Maximum Field Use Dry Film Thickness (in mils):  26        Maximum Thinner:  None        Recoat/Cure Time:  8 hours at 77°F / 3 days at 77°F [3]  Number of Coats:  1        Colors: Aqua(Green) or white        Maximum Field Use Dry Film Thickness (in mils):  120        Maximum Thinner:  None        Cure Time:  5 hours at 72°F After final cure, 15 minutes flush is required prior to being placed into service.                                                  Water        Water                             Water Contact        Contact      Contact Trade Designation          Size Restriction      Temp.        Material Coatings – Tank AquataPoxy A-6[4]          >= 50 gallons         CLD 23       EPOXY AquataPoxy A61[3]          >= 200 gallons        CLD 23       EPOXY AquataPoxy A-7[2]          >= 1000 gallons       CLD 23       EPOXY [2]  Colors:  White        Number of Coats:  1-2        Maximum Field Use Dry Film Thickness (in mils):  80        Maximum Thinner:  None        Recoat/Cure Time:  8 hours / 7 days [3]  Number of Coats:  1        Colors: Aqua(Green) or white        Maximum Field Use Dry Film Thickness (in mils):  120        Maximum Thinner:  None        Cure Time:  5 hours at 72°F After final cure, 15 minutes flush is required prior to being placed into service. [4]  Colors:  White, Black, Blue, Gray        Number of Coats:  1-2        Maximum Field Use Dry Film Thickness (in mils):  125        Maximum Thinner:  None        Recoat/Cure Time:  8 hours at 77°F / 3 days at 77°F
ADDITIONAL COMPANIES:	CuraFlo Technologies Cohesant Materials Inc.
ADDITIONAL COMPANY INFO:
CuraFlo Technologies CuraPoxy Cohesant Materials Inc.                                                  Water        Water                             Water Contact        Contact      Contact Trade Designation          Size Restriction      Temp         Material Coatings – Pipe CuraPoxy [1]                  1/2” to 4”          C. HOT       EPOXY CuraPoxy XL [2]               2” to 36”           C. HOT       EPOXY CuraPoxy LS [3]               1/2” to 4”          C. HOT       EPOXY                      [1]  Colors:  Blue        Number of Coats:  1        Maximum Field Use Dry Film Thickness (in mils): 120        Cure Time:  1 hour at 100°F followed by 4 hrs at 72°F 15 minutes flush is required prior to being placed in service [2] Colors:  Blue        Number of Coats:  1        Maximum Field Use Dry Film Thickness (in mils): 120        Cure Time:  1 hour at 100°F followed by 4 hrs at 72°F 15 minutes flush is required prior to being placed in service [3] Colors:  Blue        Number of Coats:  1        Maximum Field Use Dry Film Thickness (in mils): 20        Cure Time:  1 hour at 100°F followed by 4 hrs at 72°F 15 minutes flush is required prior to being placed in service