IAPMO RESEARCH AND TESTING, INC.
5001 E. Philadelphia Street, Ontario, CA 91761-2816 • (909) 472-4100 • Fax (909) 472-4244 • www.iapmort.org
IAPMO Research and Testing, Inc. is a product certification body which tests and inspects samples taken from the supplier's stock or from the market or a combination of both to verify compliance to the requirements of applicable codes and standards. This activity is coupled with periodic surveillance of the supplier's factory and warehouses as well as the assessment of the supplier's Quality Assurance System. This listing is subject to the conditions set forth in the characteristics below and is not to be construed as any recommendation, assurance or guarantee by IAPMO Research and Testing, Inc. of the product acceptance by Authorities Having Jurisdiction.
| Effective Date: | December 2012 | Void After:
December 2013
|
| Product: | Suction Fittings | File No. SP-3927 |
| Issued To: | WORLD WIDE SPORTS L.L.C. 2 PEBBLE CREEK RD SAINT LOUIS, MO 63124 |
|
| Identification: | Fittings shall be permanently marked as follows in a manner so as to be visible after installation in the following sequence (1)the statement "For Single or Multiple Drain Use Only", "For Single Drain Use", or "For Multiple Drain Use only" (2)maximum flow rate (3)type of fitting (4)life of the fitting in years (5)Installation position (6)Manufacturers name or requested trademark and (7)model designation and the USPC certification mark®. | |
| Characteristics: | Suction fittings for use in swimming pools, wading pools, spas and hot tubs.
Products listed on this certificate have been tested by an IAPMO R&T recognized laboratory. This recognition has been granted based upon the laboratory's compliance to the applicable requirements of ISO/IEC 17025.
|
|
|
Products are in compliance with the following code(s):
|
||
|
Uniform Swimming Pool, Spa and Hot Tub Code (USPC®)
International Plumbing Code (IPC®) |
||
|
Products are in compliance with the following standard(s):
|
||
|
ANSI/APSP-16 2011
|
||
| ||
| ||
|
MODELS: Note: ANSI/APSP-16 2011 is the successor standard to ASME A112.19.8-2007
and its addenda ASME A112.19.8a-2008 and ASME A112.19.8b-2009. Model
No. Star
100(80 gpm) Star
2000 (Wall: 64 gpm, Floor: 100 gpm) |
||
|
