This File was Combined with another file.

IAPMO RESEARCH AND TESTING, INC.

5001 E. Philadelphia Street, Ontario, CA 91761-2816 • (909) 472-4100 • Fax (909) 472-4244 • www.iapmort.org





CERTIFICATE OF LISTING

IAPMO Research and Testing, Inc. is a product certification body which tests and inspects samples taken from the supplier's stock or from the market or a combination of both to verify compliance to the requirements of applicable codes and standards. This activity is coupled with periodic surveillance of the supplier's factory and warehouses as well as the assessment of the supplier's Quality Assurance System. This listing is subject to the conditions set forth in the characteristics below and is not to be construed as any recommendation, assurance or guarantee by IAPMO Research and Testing, Inc. of the product acceptance by Authorities Having Jurisdiction.

The most updated information on this Certificate of Listing is available online at pld.iapmo.org


 

Effective Date:
no data        
Void After: no data
     
Product: Whirlpool/Air Jet Bathtubs 
File No. SP-4602
     
Issued To: MANSFIELD PLUMBING PRODUCTS
1505 INDUSTRIAL DRIVE
HENDERSON, TX  75652
     
Identification:
Factory-Assembled whirlpool or air jetted bathtubs, circulation systems, and suction fittings shall be marked with the Manufacturer's name or registered trademark, or in the case of private labeling, the name of the customer for whom the fixture or device was manufactured.
Markings shall be permanent, legible, and visible after installation.
Factory-assembled whirlpool or air jetted bathtubs shall have an adequately sized label that is affixed to a visible surface adjacent to the waste an overflow, is printed in 5 mm (2.0 in.) high letters of a contrasting color, and read as follows: "Bathtub shall be tested.  Fill the bathtub with water to overflow during rough inspection and inspect for leaks."
The product shall also bear the USPC® certification mark.
     
Characteristics:
To be installed per the manufacturer's installation instructions and the requirements of the latest editions of the Uniform Spa and Pool Code, Uniform Plumbing Code, and the National Plumbing code of Canada.

Products listed on this certificate have been tested by an IAPMO R&T recognized laboratory. This recognition has been granted based upon the laboratory's compliance to the applicable requirements of ISO/IEC 17025.
     
Products are in compliance with the following code(s):
 
Uniform Swimming Pool, Spa and Hot Tub Code (USPC®)
International Plumbing Code (IPC®)
 
Products are in compliance with the following standard(s):
 
ASME A112.19.7-06

 

 

models_SP4602

 MODELS:

 

Avalon       - 4072 AVA

Barrett      - 3666 BTAB

Barrett      - 3672 BTAB

Barrett      - 4266 BTAB

Barrett      - 4272 BTAB

Barret Alcove - 3260 BTWP

Baywood 5.0  3660 BWA

Baywood 5.5  3666 BWA

Baywood 6.0  3672 BWA

Brentwood     3666 BDAB

Brentwood     3660 BDAB

Brentwood     3672 BDAB

Brentwood     4272 BDAB

Brighton     - 4872 BTA

Bristol Bay  6060 BBA

Covington R  - 3866

Covington    - 6060 CVA

Essence      - 3672 ESAB

Essence      - 4260 ESAB

Essence      - 4266 ESAB

Essence      - 4272 ESAB

Heathrow     - 4272 HAP

Montclair    - 4272 MCA

Reo          - 3660 REAB

Reo          - 3666 REAB

Reo          - 3672 REAB

Reo          - 4272 REAB

Savannah     - 4872 SVA

CAMDEN       - (32x59-1/2)

BRISBANE     - (36x72)

ELBA R       - (42x60)

ELBA O       - (42x60)

Enso         - 7242 ENAB*

Enso         - 6642 ENAB

Enso         - 7236 ENAB

Enso         - 6636 ENAB*

HAMPTON O    - (42x68)

HAMPTON R    - (42x68)

CASTILLE     - (66x66)

 

PF 3260A

PF 3260 TFSA

PF 3660A

PF 3660 TFSA

PF 4260A

PF 4260 TFSA

PF 4260 OVA

PF 4268 OVEDA

PF 4268 OVCDA

PF 3672A

PF 4272A

PF 4860A

PF 4872A

PF 6060A