IAPMO RESEARCH AND TESTING, INC.
4755 East Philadelphia Street, Ontario, CA 91761-2816 • (909) 472-4100 • Fax (909) 472-4244 • www.iapmort.org
IAPMO R&T Product Listing
|
IAPMO Research and Testing, Inc. is a product certification body in which its product certification system includes inspection and testing of samples taken from the supplier's stock or from the market or a combination of both to verify compliance to the requirements of applicable codes and standards. This activity is coupled with periodic surveillance of the supplier's factory and/or warehouses as well as the assessment of the supplier's Quality Assurance System. This listing is subject to the conditions set forth in the characteristics below and is not to be construed as any recommendation, assurance or guarantee by IAPMO Research and Testing, Inc. of the product acceptance by Authorities Having Jurisdiction.
|
|
This IAPMO R&T Listing is current as of 10/21/2025
|
|
| Product: | Drinking Water Treatment Systems | File No. W-12850 |
| Issued To: | ZIP HEATERS (AUST) PTY LTD 67 ALLINGHAM STREET CONDELL PARK, NSW2200 Australia |
|
| Identification: | The product shall be permanently marked with the manufacturer's name or trademark. The product shall also bear the model designation, claims verified and substantiated by test data and the cUPC certification mark. Drinking water treatment systems or components shall be marked with (a) the manufacturer's recognized name, trademark, or other mark; or (b) in the case of private labelling, the name, trademark, or other mark of the customer for whom the fitting was manufactured.Markings shall be made by a permanent mark or a permanent label and shall be visible after installation. When it is impractical to affix the information specified in Items (a) and (b) directly to the product, the information shall be included in the literature accompanying the product. |
|
| Characteristics: | The point-of-use and point-of-entry systems addressed by this Standard are designed to be used for the reduction of specific substances that may be present in drinking water (public or private) which are considered health hazards.
Certification demonstrates that all materials safety and structural integrity (as applicable) requirements have been met. To be used in accordance with the manufacturer's instructions. Mark can only be used if product is already certified with IAPMO R&T to a standard cited in the current revision of the Uniform Plumbing Code. Products listed on this certificate have been tested by an IAPMO R&T recognized laboratory. This recognition has been granted based upon the laboratory's compliance to the applicable requirements of ISO/IEC 17025.
|
|
|
Products are in compliance with the following code(s):
|
||
|
Uniform Plumbing Code (UPC®)
National Plumbing Code of Canada |
||
|
Products are certified to the following standard(s):
|
||
|
CSA B483.1-2021
|
||